We at Texan Paving have more than two decades of combined experience helping customers throughout Central Texas preserve their property’s asphalt by applying a sealcoat. This preventative maintenance can extend the life of pavement and help home and business owners save money in the long run. Doing the job correctly and helping customers save money is what has made Texan Paving the asphalt contractor of choice in Austin, TX throughout the years.
The primary reason to sealcoating an asphalt pavement is to protect the pavement from the deteriorating effects of sun and water. When an asphalt pavement is exposed to sun, wind and water, the asphalt hardens, or oxidizes. This causes the pavement to become more brittle. As a result, the pavement will crack because it is unable to bend and flex when exposed to traffic and temperature changes. Sealcoating combats this situation by providing a waterproof membrane which not only slows down the oxidation process but also helps the pavement to shed water, preventing it from entering the base material.
A secondary benefit of sealcoating is an increase in the surface friction it provides. This is accomplished by the additional texture the cover aggregate adds to the pavement. With time, traffic begins to wear the fine material from an asphalt pavement surface. This result in a condition referred to as raveling. When enough of the fine material is worn off the pavement surface, traffic is driving mostly on the course aggregate. As these aggregate particles begin to become smooth and polished, the roadway may become slippery, making it difficult to stop quickly. A sealcoat increases the pavement texture and increases the surface friction properties.
Once we have verified that a sealcoat will be effective for your pavement, our team will get to work. If there are any cracks in the pavement, we will have to repair them before the process can begin. We will then apply a liquid coal tar emulsion over the surface of the pavement. The procedure of applying the seal coating and allowing it to dry and cure is usually done within a few mobilizations, depending on the size and layout of your lot. Not only will you dramatically extend the life of the asphalt, but you will greatly reduce the amount of money you would otherwise have to put toward future asphalt maintenance costs.
Get Started Today
At Texan Paving, our goal is to help our customers achieve their objectives quickly and affordably. We are committed to completing every project with professionalism and integrity. In addition to sealcoating, we can also assist you with new pavement, overlays, and striping. To learn more about our services or to get an estimate for your project today, please fill out our online form or call us today for a free sealcoating quote. We look forward to hearing from you!
History of Bee Cave, Texas
The City of Bee Cave is rich in history. The City, as we know it today, did not exist until 1987, but the idea of an area where people could live without the influence of “big city” government has been the area’s “calling card” for over 140 years. As early as the 1850s, Dietrich Bohls moved from Austin to his new home at the confluence of Barton Creek and Little Barton Creek. The population of Austin had reached 900 people, and Mr. Bohls was looking for a place to raise his family away from the confines of the city and its influence. At the time, the land west of Austin still had Indians roaming over it; therefore, other settlers in the area were scarce. The Bohls family was one of the first families to settle on the land that would become the City of Bee Cave. The area derived its name from the colonies of Mexican honeybees that lived in the banks of Barton Creek and Little Barton Creek that encompassed a large area of Western Travis County. In 1987, the City of Bee Cave administration had its humble, but proud, beginning in a nondescript portable building. The City of Bee Cave encompassed a two-square mile area with 8,800 acres of extraterritorial jurisdiction.
Currently servicing the following Cities.